If you only need a left hand brake, we definitely have what you need. The Dexter Electric Trailer Brake Assembly # 23-26 will be just the left side (driver side) brake that will come with the # 23-26-27 Dexter 10 inch 3,500 pound brake kit. This will also include the mounting hardware so no other parts will be needed. view full answer...
I was able to cross reference the 031-17-02 bearing to a 14125A and the 031-030-02 to a 25580.
For a replacement bearing/race/seal kit, you'd use part # BK3-200, which includes the 14125A outer bearing, the 25580 inner bearing, the 10-36 grease seal and a replacement cotter pin.
Should you need them, we offer replacement hubs as part # 8-219-13UC3 and replacement self adjusting brake assemblies are # 23-465 for the right side and # 23-464 for the left side. view full answer...
I may have a different solution for you, but there will not be a universal kit to add a motor to your Stallion jack, unfortunately. With that being said, I have 2 options below for you to check out. Both will be weld on applications, but are definitely worth looking at.
First is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This will have 38 inches of lift and is rated to a combined weight of 12,000 pounds. One of the big pluses with this unit is that the jacks are independent... view full answer...
Finding the correct replacement spring bar for your Equal-i-zer weight distribution system will depend on the weight rating, not so much the size of the bar. With that being said, there should be a label on the existing bar with a weight capacity on it. If this is gone though, it definitely complicates things.
The Replacement Spring Bar for Equal-i-zer # EQ90-02-1299 does match your measurements perfectly, but if your other bar is a different weight capacity, I'm not sure exactly sure... view full answer...
Yes, the correct replacement lens for the Square LED Trailer Clearance, Side Marker Light # MCL36RB that you referenced is the part # A36RB.
I pulled the two products from our warehouse to confirm this. view full answer...
For your older Thule bike rack with 2" shank you can use Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device # TH62RE as a replacement. If you would like a locking pin then use Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2. I attached a couple demonstration videos for you to check out. view full answer...
For your 2008 Fleetwood Southwind Motorhome I recommend the following replacement options:
Opti-Brite LED Dome Light - 11" Long x 4" Tall - 16 Diodes - Cool White
Item # ILL06COB
Opti-Brite LED RV Mini Dome Light - 354 Lumens - Rectangle - Neutral White - Clear Lens
Item # ILL07COB
Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens
Item # RVIL22
The Opti-Brite options are LED so they'll use less energy and last longer than incandescent bulbs... view full answer...
I may have a solution for you.
For your Furrion # C-FGH4ZSA-SS Chef Collection 3 burner range top, the replacement "burner pan" or "Top Panel" part number is C-FGH4ZSA-SS-TOPPANEL. However, I reached out to Furrion and found that this part is no longer available and they did not set any expectation that it would ever become available again.
You might consider the Furrion # FGH4ZSASS RV Cooktop, which is a close fit for your stove location. view full answer...
If your roof vent on your horse trailer has a continuous hinge, we have a few options that will work great. You could go with the smoked vent cover # BV0554-03 if you want to be able to see through it or the white # BV0554-01 if you just want to let light in but don't want to see through it.
We also have a metal cover # BV0534-00 that will last longer than the other two, you just won't have any light coming in. view full answer...
I can help you out with the replacement installation hardware for the Draw-Tite Front Mount Trailer Hitch Receiver # 65049 that fits your 2009 Ford F-250; what you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK.
All you need to do is click # RHK, enter "65049" in the "Hitch Item Number" box, select "Draw-Tite" from the drop-down menu, hit "Add to Cart" and you're set! view full answer...
Yes, we have several options, first being the Stromberg Carlson RV at 99-1/2" T x 12" W in black, # LA-401BA. We have two Surco models, one at 84-1/2" Long, # SP502L with the other for a contoured rear wall and is 97" Long, # SP501L. Based on the pics you sent in I suggest this option providing you like the longer length.
Please check out the image I attached and see the link to video of product review.GO view full answer...
Thanks for the additional information. I was able to determine that the full kit you want is the Lippert # LC333966 replacement landing gear set including the legs and drop feet, cross bar, and gear box. We also have the Lippert # LC333964, which is the same kit, plus the motor and switch. view full answer...
I do believe you have a Kwikee Series 32 step with a curved linkage so you can replace the motor and linkage with the Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145. This curved linkage is the "A" linkage that you've mentioned, so this is the complete kit needed to replace all of those components.
If you wanted to replace the entire step assembly with completely new parts you can use the Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide # LC372261. view full answer...
Yes, Replacement Rear Header for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX5459-RearHeader is the correct replacement header for TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black # TX545901. This is just the replacement header for the tailgate end.
I confirmed with TruXedo that the correct replacement latch is Replacement Latch for TruXedo Deuce 2, Edge, Lo Pro, or Original Truxedo Tonneau Covers # TX1117424. I attached a couple demonstration videos for you. view full answer...
Yes. You've found the right part. The 29/324 378 part number you've referred to off your existing jack corresponds to the Lippert Replacement Level Up Hydraulic Jack - 8,000 lbs - 15" Travel # LC26FR so it will be the correct replacement for you. This system is designed for RV's with less than 32,000-lbs GVWR. view full answer...
We have the Replacement Cover for Bulldog Velocity Series Electric Landing Gear Jack # BD500375 that will replace the cover for your jack and motor. The kit will come with new hardware to get it installed. view full answer...
According to Lippert, the correct replacement gear motor for your Power Gear 524664 is part # LC368221.
I've linked to a product description video for the replacement gear motor. view full answer...
Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit Kits TK6, TK8, TK9 # 853-2106 is made to be used with Replacement M6 x 17 mm Bolt for Thule Tracker II Half Foot Pack or Fit Kits # 924-0617-15.
The threading on both parts is M6 or 6mm in diameter. You may also need Replacement 4-mm Hex Key for Thule Cargo Carriers, Roof Racks, or Bike Racks # 853-2430-02 if you've lost that tool. I attached a demonstration video for you. view full answer...
The Gooseneck Safety Chain U Bolt Kit # 337BRB03 will not work with the B&W Turnover ball. For your gooseneck hitch you will want to use Replacement Safety Chain U-Bolt Kit # BW1900-2-1600 view full answer...